T & C: Valid for selected states only
Best Water Tank Cleaning Machines in 2020 Review
  • Share Article:

Best Water Tank Cleaning Machines in 2020 Review

Although having a water tank is a necessity, maintaining it is equally important. Water tanks. sizes are relatively large; thus, they need proper care. Not taking care of your water tank can prove to be very stressful for you. By not cleaning the water tank, you might as well be ignoring the growth of algae in it. Not only that, but it will also hamper the quality of the water and make it harmful for the users. Now, the best way to keep your water tanks clean and hygienic is with tank cleaning machines. So, here is a list and a review of some of the best water tank cleaning machines.

Best Water Tank Cleaning Equipment

Check the list of best water tank cleaning machines in 2020

1. Greenworks Pro GPW2700

It is one of the most popular high-pressure washers that we can use for cleaning water tanks. It has a PSI of 2700 with a GPM of 2.3. The Greenworks Pro comes with a constant-run motor, which helps reduce pump-priming and drastically improve trigger response. Another factor that adds to its wash performance is its pressure and flow sensors. Additionally, a point to consider is that the Greenworks Pro GPW2700 operates horizontally.

2. Karcher K5 Premium Full Control Plus 2100

From our list, the Karcher K5 Premium Full Control Plus 2100 is probably the easiest to use. It only weighs 35.4 pounds with a 2100 PSI and a GPM of 1.4. All in all, this washer is small in size, but yet it is highly effective. It is effortless to use because there are no nozzles to attach. Instead, you need to rotate its tip and adjust the power, and you are ready to go. The only thing you need to be careful of is that it is not suitable to operate on the grass, but you can use it on the pavement.

3. Sedimclean Water Tank Cleaning Machine

It is a device specially built for cleaning water tanks. The Sedimclean water tank cleaning machine has a continuous operating time of one hour with a 50w power consumption. Thanks to the device, you won’t be needing anybody’s help to clean out your water tank, and you don’t even need to get in the water tank. It sweeps out the sediments without affecting the water level. Apart from that, it is user-friendly.

4. Worx WG604

The Worx WG604 high-pressure washer comes bearing many advantages. It weighs only 29.4 pounds, having a cleaning power of 1600 PSI, and a GPM of 1.3. Because of its low psi level, we do not recommend it for heavy-duty use. But it is suitable for medium-duty. It comes with a detergent cap that lets you choose the amount of cleaner you wish to use. The Worx WG604 is highly recommended because of its innovation.

5. Craftsman CMEPW2100

The craftsman CMEPW2100 washer is very light in weight, weighing only around 29 pounds. It has a cleaning power of 2100 PSI and a GPM of 1.3. It has a long cord to provide comfort to its users. To be precise, it is 35 feet long. If we compare it with other washers’ cable, that is an extra 10 feet the product is offering. Thanks to it, you won’t be needing an extension for an additional reach. It even cleans concrete with efficiency with its turbo rotating blast nozzle.

Also Read: Top 10 Water Tank Cleaning and Repair Services in Delhi

6. Generac 8874

You should consider the Generac 8874 if you are looking for a product that has high power. It comes packing a 196cc engine, weighing around 60 pounds. It has a relatively high PSI, clocking in at 2900, with a GPM of 2.4. Furthermore, it makes hard cleaning jobs look easy with its horizontal shaft-pump and a large engine. An innovative measure that was taken by the manufacturers is building a thermal relief valve. It discharges water from the pump sometime after the spray is not in use. It makes the machine cooler and extends its lifespan.

How to Clean a Water Tank Efficiently?

Here is a guide on cleaning a plastic water tank entirely.

Open the Tap

It is the initial step to cleaning your tank; thus, it would help if you emptied your tank to clean it. So, make sure to open the tap so that most of the water from the tank rushes out. Remember to connect a pipe to the outlet so that you can lead the water to a place where it won’t clog up or flood an area. For the water that is at the very bottom of the tank, use a bucket.

Taps are usually a little above the bottom of the tank, so you would have to remove the water at the bottom manually. You can do it by using a bucket to scoop it out. Once there is not much water left that can be scooped out with a bucket, use a smaller vessel, like a mug.

Still, there will be some water left. You can use a vacuum cleaner for removing the water that you cannot scoop out—the vacuum cleaner can also remove any extra dirt at the bottom of the tank. By now, there won’t be any water left in the tank. Be sure to soak the remaining water with a towel if it exists.

Clean the Interior

As there is no water left, you can begin by cleaning the inside part of the tank. You can use a water tank cleaning machine for this process. if you don’t have a high-pressure washer, you can start by preparing a cleaning mixture. All you need to do is mix detergent in hot water.

Now, scrub the interior of the tank. You can do it initially without the solution, but you need to eventually clean it. Rub vigorously to remove tough stains. You have to keep scrubbing the interior until it is free of dirt.

For those who have a washer, you can use them to clean your tanks’ interior like the ones mentioned above. It will make the cleaning process effortless. You need to make sure that you are using the washer correctly by holding it at the right angle and pointing it to the tank from the appropriate distance. Don’t forget to wash the corners because it can be difficult to remove dirt from these areas. A toothbrush can be a useful tool for cleaning out the corners.

After scrubbing or washing the interior with the washer, apply baking soda to the walls. It will help you get rid of all the sediments and dirt that is tough to remove. Scrub it with a sponge after applying the baking soda. Once you have scrubbed the tank, you need to rinse it with warm water and let it be for some time. Please dispose of the water appropriately after letting it be.

Disinfect the Tank

It is the most critical step in cleaning your tank. Fill 3/4th of your tank with clean water and add chlorine bleach to it according to your tank’s size. For instance, use 1 gallon of bleach for a 1,000-gallon tank.

Now, fill the remaining part of the tank with water and let it rest for 24 hours. Keep checking the amount of chlorine in the tank at regular intervals. Drain the water after 24 hours with all buckets, vacuum cleaners, and mugs.

Conclusion

So, these were the best water tank cleaning machines you could use to clean your tanks efficiently. Furthermore, you must choose the product that caters to all your needs. For cleaning the water tank efficiently, make sure that there is no bleach or residue left. Having any amounts of leftover residue can have a severe impact. More importantly, prefer to use advanced water tank insulation jackets for your ISI water tanks to keep yourself safe from UV rays, infections, pollutants and help maintain water tank inner temperature.

Copyright © 2019 Arch tech Building Systems | Privacy Policy | FAQ | Support